Home        Store        Learn        Blog

Pixhawk and Raspberrypi not communicating

Hi guys,

We are having problems with the BR2 it seems like the pixhawk and the Raspberrypi are not communicating to each other (no blinking leds) we have changed the pi and the cable and no success. We´ve connected the pixhawk to the computer and seems like working properly. Is there anything im missing?

Also the http://192.168.2.2:2770/system is not showing anything with the cable well connected and correct IP address…

Any help is appreciated!

Please try the troubleshooting steps here, note your results and put them here if you still have trouble.

1 Like

Hey @jwalser

The problem was the fathom X :smiley:

thanks

Contact support@bluerobotics.com if you need any help with that.