JST GH to DF13 Adapter

Blue Robotics Products Flight Controllers
1

Probably a stupid question but want to make sure…:slight_smile: I want to quickly swap the Pixhawk to the Navigator and I have the pre 22 pressure sensor. I can’t get hold of the JST GH to DF13 Adapter at this point.

Seeing that the pins and colors matches both DF13 and JST cable, I assume that I can just cut and solder the JST end onto the DF13 cable? Is that correct?

Best, Joe

2

Hi Joe -
That’s correct - you can simply splice the wires matching red/black/white/green wires to connect your pressure sensor. Don’t forget to cover the joints with heatshrink!

3

Thanks Tony…:slight_smile: