Hi @dtrail
More tips for finding issue:
Check if your topside computer is hitting 100% load when recording starts.
That could be done by hitting “ctrl + shift + Esc” at the same time
If you are at or close to 100% load your pc is the limit.
It could be that your graphic card is not using “hardware acceleration” to do the graphics handling, leading to the processor working to hard.
If this is the case, solution is different with different pc/graphic cards…
A way to try is to shut down QGC, right click on your icon for QGC and chose “run by…” followed by your graphic card.
Another tip, do your camera AND your computer screens resolution work at 1080x1920?
If not, resolution change handling will by tough for the PC.