Home        Store        Docs        Blog

Celsius temperature sensor ovf


(Gustav Jakobsson) #1

We have been trying to get the celsius temperature sensor to work with with an arduino board but are only getting “ovf” as readings.
There board we are using is the Adafruit feather M0 LoRa which has a logic voltage of 3.3v, so that shouldn’t have affected the sensor.
We pulled out the calibration values from the library code and they all read 65535.
We are pretty much stumped and are starting to think that the sensor is broken somehow.
Any response is appreciated


(Jacob) #2

A post was merged into an existing topic: Bar30 not working correctly


(Jacob) #3