WisPLC v1.1 LX200V20 Help with connecting raspberry pi to laptop

Blue Robotics Vehicles
1

Hello,

Im new to this rov build, I have a WisPLC V1.1 with LX200V20 but im having troubles accessing blueos with this setup. I assumed this WisPLC is same as the fathom x interface. before i installed the WisKey im able to access/communicate blueos/raspberry pi when plugged directly ethernet to my laptop. Now im using this tether interface Ethernet 2 showed up on the list and i configured to 192.168.2.1. Now im stuck I cant figure out how to access the blueos interface or raspberry pi 192.168.2.1 refused to connect. Any help and suggestion please.

Also, my PIXHawk has a 2 yellow light blinking what does this mean and how to fix it?

Respectfully,

BG

IMG_6516
IMG_65161536×2048 836 KB

IMG_6523
IMG_65231536×2048 453 KB

IMG_6519
IMG_65191536×2048 783 KB

2

Hi @bgmining -

I see lights on your topside PLC tether adapter, but not your subsea side - do you have power connected?

It’s also worth noting that BlueOS comes up at 192.168.2.2, or blueos.local…

3

Solved: Problem was a faulty RJ45 connector, tried a different rj45 and i was able to access 192.168.2.2 after that.