Pixhawk/raspberry to windows PC

Blue Robotics Vehicles BlueROV2
1

Hi all,

I have the pixhawk (with loaded firmware) connected via USB to raspberry Pi 3 (with bluerobotics preloaded micro SD).

Camera is connected to raspberry pi and Rasperry pi is connected via an ethernet cable to my windows 10 laptop (with QGC instaled).

Everything is powered up, but I do not know what to do now to get video and comunication.

Could please someone help me

Thank you very much in advance

 

2

Hi Nicolas,

You have to set your host computer’s IP address to “192.168.2.1”. There are instructions on how to do so here: http://ardusub.com/initial-setup/#windows

Please let me know if that helps.

-Rusty

3

Thank you very much Rusty

Everything is working fine :slight_smile: