Hi! That is my first time using the BlueROV2. I have updated the softwares and now I am in the step where we need to connect to 192.168.2.2 from a browser. The problem is I get this message on my rpi : [rpi_messages] So, I would be happy, if you have any idea about what’s going on with my rpi …

Hello @navylos_ear you had some answers and help here, but they were misguided and missing the root cause of the problem. So I have deleted those posts to clear the confusion. To be clear, you are having issues communicating with the raspberry pi over the network (cannot access http://192.168.2.2:2…

Hi Jacob, thank you for your answer, however I have already followed these steps, this is what I get when I tried to ping 192.168.2.2: [ipconfig_laptop] [ping_19216822] I changed the ethernet cable to check if it comes from here but have the same result… turn off my firewalls and reboot my lapt…

Ok, so you are in an interesting situation. The output of ipconfig is showing the correct configuration for the network, and indicates that you should be able to ping the ROV. However, the ping fails. Please check for me that the lights on the ethernet port connector are illuminated on the raspberr…

I have checked the lights on the ethernet port of the raspberry pi, it’s blinking, for the ethernet port of the adapter you mean, the one on the fxti : [IMG_20210415_162712] , it’s blinking too :slight_smile: So I’ve tried to reset my network and have the same results :frowning: …

I’ll be back tomorrow Jacob, hope we’ll find the answer :slight_smile: I still have hope! Have a nice day!

Hello, Jacob. I hope everything is going well for you! Do you have any idea what the problem is with my BlueRov2??

Ok @navylos_ear , from what I can see: Companion is running correctly A Windows network adapter is configured correctly (double check that you have configured the adapter that the ROV is actually connected to) So now I think the problem may be with the physical ethernet connection. We can narrow d…

Hi Jacob! Thank you for the reply, I’ll test this out :slight_smile: I’ll get in touch with you when it’s done :+1: Stay safe and have a nice day, Regards. Solyvan

Hi Jacob, good news, I’m able to connect to the BlueRov2 by removing the tether and FXTI! Do you know by the result I get where the problem is located ?? Best regards, Solyvan.

Can't connect to my rpi 3B

Blue Robotics Software

Topic		Replies	Views
Trouble connecting to BlueROV2 from laptop BlueROV2	13	276	June 30, 2026
Can not connect BlueROV to topside computer QGroundControl	24	269	June 19, 2025
BlueROV2 communication problem Blue Robotics Software	19	4486	December 6, 2019
Lost contact with rov and blueos BlueROV2 Heavy	16	364	June 10, 2025
Unable to connect BlueROV2 to topside computer General Discussion blueos	2	120	June 19, 2025

Community

BR Website

Software Docs

Autopilot Docs

BR and Beyond

Software

Can't connect to my rpi 3B

Community

BR Website

Software Docs

Autopilot Docs

BR and Beyond

Software

Can't connect to my rpi 3B

Related topics