I have a BlueROV2 R1 (stock build, no additions) that I just upgraded to the latest version of BlueOS with a Pixhawk controller updated to Pixhawk 1 - 4.10. After updating to BlueOS I have lost the camera feed (everything else seems to be working). I have gone through the troubleshooting steps other…

@EliotBR I updated the Qground control, still the same problem. In the preview of the BlueOS is fine and in the QGroundControl it isn’t.

@bajaMike you said you were curious about the logs, here it is: [image] Just when I start QGroundControl this appers: [image] Do you guys have more suggestions?

No updates here - I am hoping to put a full day into it in the coming week, but am honestly past my depth in troubleshooting. I think disassembly and trying to just get the RPi and the camera working standalone is the next step for me.

Hi @mdares , welcome to the forum :slight_smile: Apologies for the delay on this. A couple of questions to clarify: Can you specify which camera you have ? If it’s a USB camera, does it work / is it detected when you connect it to a normal computer (e.g. in your operating system’s Camera applicati…

@EliotBR I am back at work this week and will find some time to answer your questions. Sorry for the delay. I know the connection between the camera and the Pi is by a ribbon cable.

[image] Matthew: I know the connection between the camera and the Pi is by a ribbon cable. Ok, that’s a Raspberry Pi camera (not a USB camera), which is not supported in BlueOS 1.0 (the latest “stable” release). If you turn on Pirate Mode you should be able to update to a recent BlueOS 1.1 b…

@EliotBR So this all seems to have worked (I was able to enable legacy mode) but getting this message when I hit the video streams page: [image] And QGroundControl does not connect to video either - everything else seems fine.

Can also confirm: I was able to login to the host PI OS and take a photo with raspistill Just got this message: [image]

Last question - if I opt to try out the USB Camera - do I need to replace the motor mount too?

[image] Matthew: getting this message when I hit the video streams page: [image] And QGroundControl does not connect to video either - everything else seems fine. This is about the streams you have configured in BlueOS, and the way you’re connecting to BlueOS. Is the Raspberry Pi camera ap…

BlueROV2 R1 Camera not detected after upgrade to BlueOS

Blue Robotics Software ArduSub

Topic		Replies	Views
Video not available QGroundControl	7	1741	April 1, 2023
Waiting for video Blue Robotics Vehicles	3	1097	April 5, 2023
New Bluerov2, No video feed Cameras	1	1001	October 13, 2022
Raspberry Pi Camera stream not working QGroundControl	23	5711	November 14, 2022
Camera visualization problem in QGroundControl QGroundControl	9	2054	September 6, 2023

Community

BR Website

Software Docs

Autopilot Docs

BR and Beyond

Software

BlueROV2 R1 Camera not detected after upgrade to BlueOS

Community

BR Website

Software Docs

Autopilot Docs

BR and Beyond

Software

BlueROV2 R1 Camera not detected after upgrade to BlueOS

Related topics