What are option to add more lighting to existing 4 lights?

[EliotBR (Eliot)]

@noppita

thank you very much for your reply and support.

No worries, glad to help

@noppita

You are blue robotic staff right?

Not at the moment.

@noppita

is there any limitation on how many lights can be connected in series for my blue rov

This is dicussed in the following comment by Rusty (@rjehangir)

Daisy-chaining more than four lumens?

Hi @TinyDiver As Matt mentioned, it is possible and fine to daisy chain more lights together. The only limitation that will eventually be hit is the amount current going through the wires. That depends on the voltage you run the lights at. For example, at maximum power they always consume about 15 Watts, so at 12V, that’s 15W/12V = 1.25 amps per light. So, which six lights you’d have up to 6 x 1.25 = 7.5 amps running through the wires. That’s about the normal rating for the 22 AWG wires to han…

@noppita

what part do i need to order for adding 2 or 4 lighting system to my existing 4 lighting system?

You’d need the lights themselves, an M6 lights penetrator if you don’t already have one, and the equipment to pot the penetrator (if you don’t have any potting equipment you’ll probably want at least a potting kit, potting compound/epoxy, and some acetone wipes).