Geometry Data for T200

Hello everyone
I am working on propeller geometry and need to perform validation of thrust and power data with my own code. For this I need the geometrical data of T200 propeller like station, chord, pitch, twist etc. I have searched on google but no luck with this.
Can anybody help in this regard.

Hi @farooq -
Welcome to the forums! Unfortunately that data on the T200 propeller is considered proprietary, and beyond the pitch has not been shared… From the product page:

The T200 propeller has a 76.2 mm outer diameter, and a 40 mm diameter central hub. It also has a pitch of 22.5° at 75% of its radius , and spins at about 3075 RPM full throttle 12 V, and 3600 RPM 16 V.

There’s some additional discussion available about thrust and flow rate estimation here, if that’s relevant / of interest.