Has anyone put their topside Fathom-X board in a case to protect it? I am working on designing a 3d printable case now but am curious if anyone else has already come up with a solution. Thanks, Jake.

Great question. Also, how are you getting power to the topside Fantom-X board? I can pull power from the battery inside the vehicle, but I’m wondering if there’s some obvious solution people use on the other end.

@Brendan, we always power the topside Fathom-X board through the USB connector on it, which is specifically (and only) for power.

Oh! Awesome. Is it intended to get power via USB on the vehicle side, too?

Brendan, It can be powered equally well by USB or the terminal block power input. We use the terminal block input on the vehicle since there’s power available and the USB connection on the surface since that’s more readily available. -Rusty

I’m using a NEMA water-proof case and some water-proof bulkhead connectors to protect my Fathom-S topside board. [image]

Thanks Paul; I may have to rethink my case design after seeing yours. I was planning a simple protective case for the X but may move towards something more protective like what you are using.

We just put this 3D print case design together. Not waterproof, more just to protect the board from damage. [image] [image] [image]

@schoonerlabs , Nice work. Looks good. Regards, TCIII AVD

Hi all, We are working on a topside case for the Fathom-X as well. It’s pretty similar to the ideas on here except that we are including a USB to Ethernet adapter in the box so that the box only requires a USB connection to the computer. We’re still figuring out the case design. We have a few 3D p…

I have likely misunderstood Rusty’s comment that the topside case for the Fathom-X he is working on will have a USB to ethernet adaptor as I had thought the Fathom-X allowed for using just a USB connection to a computer as it is. Can anyone enlighten me? At the moment I have my computer connected t…

Fathom-X case?

General Discussion

rjehangir (Rusty) September 12, 2016, 5:15pm 19

For anyone reading, this conversation is continued here: https://discuss.bluerobotics.com/t/ardusub-and-pixhawk-issue/

Topic		Replies	Views
Fathom-x topside power problem Communication Interfaces fathom-x	3	1489	December 13, 2016
Fathom X with Pixhawk QGroundControl	9	1926	May 31, 2019
How to wire Fathom X pair for 140VDC power and communication Communication Interfaces fathom-x	4	3146	November 28, 2022
Fathom X Problem - seeking advice Communication Interfaces fathom-x	2	1147	January 14, 2022
FathomX power from ROV power Communication Interfaces fathom-x	4	1826	August 16, 2016

Community

BR Website

Software Docs

Autopilot Docs

BR and Beyond

Software

Fathom-X case?

Community

BR Website

Software Docs

Autopilot Docs

BR and Beyond

Software

Fathom-X case?

Related topics