Hi @FIN_TKG -
In answer to your questions:
- The A50 DVL does have its own heading and orientation sensors, by default they are not used by the ArduSub EKF. See this thread.
- Definitely calibrate your gyro with the vehicle on the bench on land, with it closed up and “warm” for best results. You can only do this from the Vehicle Setup page in BlueOS.
- See thread linked in #1.
- See thread linked in #1.
- I’m not aware of any IMUs that would provide better performance, other users have definitely tried some. This may also be helpful.
- Maximizing seperation distance is advisable, but it is very difficult to do in the context of the vehicle! Generally a good compass calibration is enough!
- To improve your position, generally another localization method is used in conjunction with a DVL - expecting perfect position with no drift from a DVL alone is unrealistic… The WaterLinked UGPS or Cerulean Sonar Omnitrack would fix the issue quickly!
- Yes, but good luck finding an affordable FOG that would fit, even in an external enclosure! A driver to integrate into ArduSub would also be necessary, this would likely require re-compiling the firmware…
- Not that I’m aware of, outside of what you might find on this forum via the search tool!
- A seprate companion computer seems unlikely to be necessary…
In general, relying solely on a DVL for position seems to be the issue to me - they are great for position hold and short term relative location tracking, but inherently will always have issues with position estiamtes as they only supply a velocity estimate that is integrated !