Home        Store        Learn        Blog

4" Body Tube Coupler from TDSX

We had a need for a coupler that would work with the Blue Robotics 4" acrylic tube. So, we made one. Here is a picture of it during pressure testing at University of South Florida. The coupler was successfully tested to 800psi.


Cool to see - thanks for sharing! :slight_smile:

Out of interest, what was the use-case that required a coupler, rather than just using a single longer tube with some kind of mount in the middle?

We use an opaque tube for the main body of our Barracuda AUV but we needed a clear window that would allow us to have a downward looking camera.

1 Like

Ahh, fascinating! :smiley: