# \#basic-esc

**URL:** https://discuss.bluerobotics.com/tag/basic-esc/55.md

[Latest](https://discuss.bluerobotics.com/latest.md) · [Categories](https://discuss.bluerobotics.com/categories.md) · [Tags](https://discuss.bluerobotics.com/tags.md)

---

## [Are CW and CCW T200 thrusters the same motor?](https://discuss.bluerobotics.com/t/are-cw-and-ccw-t200-thrusters-the-same-motor/23725)

<div class="topic-metadata">

**Author:** [@luthfanzafran](https://discuss.bluerobotics.com/u/luthfanzafran)\
**Replies:** 3\
**Last updated:** [October 14, 2026, 12:06am UTC](https://discuss.bluerobotics.com/t/are-cw-and-ccw-t200-thrusters-the-same-motor/23725 "2026-10-14T00:06:53Z")

</div>

Hi everyone, I recently purchased a T200 Thruster, listed as “regular for CCW” (meaning the CCW propeller is pre-installed). While setting it up, I started wondering about the CW/CCW distinction and want to make sure I …

---

## [Unable to run T200 thrusters with a normal ESC](https://discuss.bluerobotics.com/t/unable-to-run-t200-thrusters-with-a-normal-esc/11879)

<div class="topic-metadata">

**Author:** [@asmeiitr](https://discuss.bluerobotics.com/u/asmeiitr)\
**Replies:** 1\
**Last updated:** [April 4, 2022, 12:53am UTC](https://discuss.bluerobotics.com/t/unable-to-run-t200-thrusters-with-a-normal-esc/11879 "2022-04-04T00:53:08Z")

</div>

I am using T200 thrusters but unfortunately, one of the ESCs that came with the thrusters has stopped working. So we are trying to run a thruster with this ESC 30A BLDC ESC - Brushless Motor Speed Controller buy online a…

---

## [Can a Blue Robotics Basic ESC cause intermittent motor starts at neutral?](https://discuss.bluerobotics.com/t/can-a-blue-robotics-basic-esc-cause-intermittent-motor-starts-at-neutral/23522)

<div class="topic-metadata">

**Author:** [@alon](https://discuss.bluerobotics.com/u/alon)\
**Replies:** 5\
**Last updated:** [August 29, 2026, 10:19am UTC](https://discuss.bluerobotics.com/t/can-a-blue-robotics-basic-esc-cause-intermittent-motor-starts-at-neutral/23522 "2026-08-29T10:19:48Z")

</div>

I’m using a Blue Robotics M200 motor with a Blue Robotics Basic ESC controlled by an ESP32. The ESP32 sends 1500–1900 µs pulses for one direction, with 1500 µs as neutral. System is powered by 12.8V LifePO4. The system …

---

## [Scheme of the basic esc board](https://discuss.bluerobotics.com/t/scheme-of-the-basic-esc-board/23280)

<div class="topic-metadata">

**Author:** [@Sarci](https://discuss.bluerobotics.com/u/Sarci)\
**Replies:** 1\
**Last updated:** [July 3, 2026, 4:36pm UTC](https://discuss.bluerobotics.com/t/scheme-of-the-basic-esc-board/23280 "2026-07-03T16:36:39Z")

</div>

Hello, I’m fixing basic esc board, ceramic capacitor is not working. I would like to know basic esc board scheme, and i would like to know specifications for all elements. Also its szf v1. Thank you!

---

## [Risk of outgassing from ESC silicone cables?](https://discuss.bluerobotics.com/t/risk-of-outgassing-from-esc-silicone-cables/23130)

<div class="topic-metadata">

**Author:** [@andax](https://discuss.bluerobotics.com/u/andax)\
**Replies:** 0\
**Last updated:** [June 7, 2026, 7:04pm UTC](https://discuss.bluerobotics.com/t/risk-of-outgassing-from-esc-silicone-cables/23130 "2026-06-07T19:04:26Z")

</div>

I assume the insulation on the ESC cables are silicone (as they are quite flexible and feel like it). Silicone has the bad habit of outgassing siloxanes that can deposit on optics and degrade them. Especially on cold su…

---

## [Battery current-peaks](https://discuss.bluerobotics.com/t/battery-current-peaks/22690)

<div class="topic-metadata">

**Author:** [@Erlingns95](https://discuss.bluerobotics.com/u/Erlingns95)\
**Replies:** 1\
**Last updated:** [March 26, 2026, 7:43pm UTC](https://discuss.bluerobotics.com/t/battery-current-peaks/22690 "2026-03-26T19:43:28Z")

</div>

Hello guys! I want to learn more about the electronics we are working with. We are trying to create a few different garage-builds, and find it intriguing to mix the different BR batteries and thrusters. Wanting to follo…

---

## [Issue with Single Thruster Underperforming on Submerged ROV](https://discuss.bluerobotics.com/t/issue-with-single-thruster-underperforming-on-submerged-rov/22206)

<div class="topic-metadata">

**Author:** [@HCY](https://discuss.bluerobotics.com/u/HCY)\
**Replies:** 7\
**Last updated:** [January 5, 2026, 3:07am UTC](https://discuss.bluerobotics.com/t/issue-with-single-thruster-underperforming-on-submerged-rov/22206 "2026-01-05T03:07:44Z")

</div>

We have a custom-built underwater ROV running ArduSub, with a thruster layout that matches the standard BlueROV 6DOF configuration. The vehicle uses two separate pressure housings: a battery tube and an electronics tube.…

---

## [Controlling ESC with Jetson Xavier (python)](https://discuss.bluerobotics.com/t/controlling-esc-with-jetson-xavier-python/10013)

<div class="topic-metadata">

**Author:** [@mahmoudf98](https://discuss.bluerobotics.com/u/mahmoudf98)\
**Replies:** 8\
**Last updated:** [December 3, 2025, 10:32pm UTC](https://discuss.bluerobotics.com/t/controlling-esc-with-jetson-xavier-python/10013 "2025-12-03T22:32:30Z")

</div>

Hello, Is there is a python library to control the ESC to send PWM signals? \*I am using Nvidia Xavier NX Dev Kit.

---

## [What is the Maximum Current Limit of the Blue Robotics 5V/6A Power Module (R1)?](https://discuss.bluerobotics.com/t/what-is-the-maximum-current-limit-of-the-blue-robotics-5v-6a-power-module-r1/21901)

<div class="topic-metadata">

**Author:** [@Chandan](https://discuss.bluerobotics.com/u/Chandan)\
**Replies:** 1\
**Last updated:** [October 24, 2025, 4:00pm UTC](https://discuss.bluerobotics.com/t/what-is-the-maximum-current-limit-of-the-blue-robotics-5v-6a-power-module-r1/21901 "2025-10-24T16:00:06Z")

</div>

Hi everyone, We’re testing a setup using a T200 ESC to drive a T500 thruster. Our input power is supplied at 16.5 VDC 1000W. Based on our calculations, the T500 thruster should draw around 25 A at this voltage. …

---

## [Basic ESC 500 Hardware/Firmware Specifications](https://discuss.bluerobotics.com/t/basic-esc-500-hardware-firmware-specifications/21683)

<div class="topic-metadata">

**Author:** [@sner](https://discuss.bluerobotics.com/u/sner)\
**Replies:** 0\
**Last updated:** [September 28, 2025, 9:26pm UTC](https://discuss.bluerobotics.com/t/basic-esc-500-hardware-firmware-specifications/21683 "2025-09-28T21:26:32Z")

</div>

My group is currently working with a set of Basic ESC 500 units for driving a set of M200 Motors. We’re interested in some lower-level control tasks using these devices, and were hoping to get some insight into the cont…

---

## [Unable to Spin M200 motor – ESC Auto-Disarms After Moving Slider (Blue Robotics M200 + Basic ESC + ArduSub)](https://discuss.bluerobotics.com/t/unable-to-spin-m200-motor-esc-auto-disarms-after-moving-slider-blue-robotics-m200-basic-esc-ardusub/21609)

<div class="topic-metadata">

**Author:** [@Subsurface](https://discuss.bluerobotics.com/u/Subsurface)\
**Replies:** 3\
**Last updated:** [September 18, 2025, 10:29pm UTC](https://discuss.bluerobotics.com/t/unable-to-spin-m200-motor-esc-auto-disarms-after-moving-slider-blue-robotics-m200-basic-esc-ardusub/21609 "2025-09-18T22:29:15Z")

</div>

Hello everyone, I’m working on an autonomous UUV using Blue Robotics M200 motor with theie Basic ESC, running the ArduSubversion of ArduPilot. My companion computer is a Raspberry Pi 5 running BlueOS, and I use QGroundC…

---

## [Stabilize mode not working - cant diagnose reason](https://discuss.bluerobotics.com/t/stabilize-mode-not-working-cant-diagnose-reason/21540)

<div class="topic-metadata">

**Author:** [@ankanmondal](https://discuss.bluerobotics.com/u/ankanmondal)\
**Replies:** 1\
**Last updated:** [September 7, 2025, 4:44pm UTC](https://discuss.bluerobotics.com/t/stabilize-mode-not-working-cant-diagnose-reason/21540 "2025-09-07T16:44:49Z")

</div>

we are using the 4.1.1 ardusub firmware & vectored 6dof frame and while in manual the thruster pwms are fine but in stabilize mode, the z axis thrusters (5678) are pushing water in the same direction, when pitched or rol…

---

## [PING 1D ISNT DETECTING TO PING VIEWER](https://discuss.bluerobotics.com/t/ping-1d-isnt-detecting-to-ping-viewer/21493)

<div class="topic-metadata">

**Author:** [@terratech](https://discuss.bluerobotics.com/u/terratech)\
**Replies:** 1\
**Last updated:** [August 30, 2025, 8:50pm UTC](https://discuss.bluerobotics.com/t/ping-1d-isnt-detecting-to-ping-viewer/21493 "2025-08-30T20:50:02Z")

</div>

My Ping1D was working normally and showing readings in Ping Viewer. I started a firmware update, but during the process the RX/TX connection became loose and the update was interrupted. Since then, the Ping1D is no longe…

---

## [Extension Development: "This extension is enabled but the container is not running"](https://discuss.bluerobotics.com/t/extension-development-this-extension-is-enabled-but-the-container-is-not-running/20853)

<div class="topic-metadata">

**Author:** [@DuncanODL](https://discuss.bluerobotics.com/u/DuncanODL)\
**Replies:** 7\
**Last updated:** [July 21, 2025, 6:03pm UTC](https://discuss.bluerobotics.com/t/extension-development-this-extension-is-enabled-but-the-container-is-not-running/20853 "2025-07-21T18:03:10Z")

</div>

As the title implies I am having issues where I upload an extension to BlueOS and I receive an error saying the extension is enabled but the container is not running. When I check the console logs it also says that i…

---

## [Connecting 6 T200 thrusters to raspberry pi 4](https://discuss.bluerobotics.com/t/connecting-6-t200-thrusters-to-raspberry-pi-4/20494)

<div class="topic-metadata">

**Author:** [@kingcoolance](https://discuss.bluerobotics.com/u/kingcoolance)\
**Replies:** 10\
**Last updated:** [July 15, 2025, 12:24pm UTC](https://discuss.bluerobotics.com/t/connecting-6-t200-thrusters-to-raspberry-pi-4/20494 "2025-07-15T12:24:47Z")

</div>

Hey guys, so I am pretty new to using Blue Robotics products and was wondering how I would connect 6 T200 thrusters to a raspberry pi 4 for my ROV project. I want some confirmation that I can do this and some guidance on…

---

## [Changing ESC parameters](https://discuss.bluerobotics.com/t/changing-esc-parameters/20905)

<div class="topic-metadata">

**Author:** [@johng](https://discuss.bluerobotics.com/u/johng)\
**Replies:** 2\
**Last updated:** [July 11, 2025, 9:07am UTC](https://discuss.bluerobotics.com/t/changing-esc-parameters/20905 "2025-07-11T09:07:07Z")

</div>

Hi all I have a situation where I am attempting to turn an M200 on and off by using a PWM input that has an input of 1300 to 1700 PWM. I want the M200 to run at max rpm so am I correct in thinking I can do that by usin…

---

## [My boat can't go backwards](https://discuss.bluerobotics.com/t/my-boat-cant-go-backwards/20629)

<div class="topic-metadata">

**Author:** [@PaoloN](https://discuss.bluerobotics.com/u/PaoloN)\
**Replies:** 4\
**Last updated:** [October 31, 2025, 9:45pm UTC](https://discuss.bluerobotics.com/t/my-boat-cant-go-backwards/20629 "2025-10-31T21:45:33Z")

</div>

I bought the motors and escs from bluerobotics some time ago and built a bathymetric survey boat. Everything works fine, but the only problem is that I have never been able to reverse in manual mode with the remote contr…

---

## [Technical Issues and Modifications Inquiry for T500 Thruster 50A ESC](https://discuss.bluerobotics.com/t/technical-issues-and-modifications-inquiry-for-t500-thruster-50a-esc/20577)

<div class="topic-metadata">

**Author:** [@AnkitPandia](https://discuss.bluerobotics.com/u/AnkitPandia)\
**Replies:** 4\
**Last updated:** [June 10, 2025, 11:01am UTC](https://discuss.bluerobotics.com/t/technical-issues-and-modifications-inquiry-for-t500-thruster-50a-esc/20577 "2025-06-10T11:01:18Z")

</div>

We are currently using T500 Thruster 50A ESCs in one of our robotic systems and have encountered some issues that we’d like to report and seek guidance on: Overheating Issue: The ESCs are getting excessively hot durin…

---

## [T200 Welcome notes](https://discuss.bluerobotics.com/t/t200-welcome-notes/20586)

<div class="topic-metadata">

**Author:** [@Kansas](https://discuss.bluerobotics.com/u/Kansas)\
**Replies:** 1\
**Last updated:** [June 7, 2025, 9:01pm UTC](https://discuss.bluerobotics.com/t/t200-welcome-notes/20586 "2025-06-07T21:01:09Z")

</div>

I have a T200 with a standard Blue Robotics ESC. Recently, when I power up, I get the usual musical notes letting me know it is powered. Yet I can no longer get any hint of rotation out of the motor at any commanded spee…

---

## [Trouble programming Basic ESC](https://discuss.bluerobotics.com/t/trouble-programming-basic-esc/20248)

<div class="topic-metadata">

**Author:** [@Felipe](https://discuss.bluerobotics.com/u/Felipe)\
**Replies:** 0\
**Last updated:** [May 1, 2025, 2:46pm UTC](https://discuss.bluerobotics.com/t/trouble-programming-basic-esc/20248 "2025-05-01T14:46:09Z")

</div>

Hello, I am having trouble changing settings for the BR Basic Esc (small version). I am able to connect it using a usb serial device i bought. In the BlHelisuite, I am able to connect, however when I try to read the ESC…

---

## [Basic ESC not initializing with battery powered Arduino](https://discuss.bluerobotics.com/t/basic-esc-not-initializing-with-battery-powered-arduino/20046)

<div class="topic-metadata">

**Author:** [@mstephens](https://discuss.bluerobotics.com/u/mstephens)\
**Replies:** 8\
**Last updated:** [April 10, 2025, 10:46pm UTC](https://discuss.bluerobotics.com/t/basic-esc-not-initializing-with-battery-powered-arduino/20046 "2025-04-10T22:46:38Z")

</div>

Well, I’m stumped. My Basic ESC works fine when the Arduino is connected to a PC via USB. But when the Arduino is powered by batteries, the ESC gives the first four beeps but not the fifth, and it will not run the motor…

---

## [Basic ESC Response Time (Ardusub and Pymavlink)](https://discuss.bluerobotics.com/t/basic-esc-response-time-ardusub-and-pymavlink/19903)

<div class="topic-metadata">

**Author:** [@DionisioEng](https://discuss.bluerobotics.com/u/DionisioEng)\
**Replies:** 13\
**Last updated:** [April 8, 2025, 10:31am UTC](https://discuss.bluerobotics.com/t/basic-esc-response-time-ardusub-and-pymavlink/19903 "2025-04-08T10:31:15Z")

</div>

Hi! I have a setup similar to the Blue ROV2 Heavy, with 8 T200 thrusters and 8 Basic ESCs. I am trying to control the thrusters directly using Ardusub and Pymavlink. I would prefer to control the thruster independently,…

---

## [PreArm: AHRS: waiting for home](https://discuss.bluerobotics.com/t/prearm-ahrs-waiting-for-home/20008)

<div class="topic-metadata">

**Author:** [@AriesMarine](https://discuss.bluerobotics.com/u/AriesMarine)\
**Replies:** 0\
**Last updated:** [April 7, 2025, 11:15am UTC](https://discuss.bluerobotics.com/t/prearm-ahrs-waiting-for-home/20008 "2025-04-07T11:15:46Z")

</div>

I am getting Prearm:AHRS : Waiting for home. How should I rectify this issue ? Using the Latest ROV2.

---

## [Controlling servo via PWM channels (Jupiter)](https://discuss.bluerobotics.com/t/controlling-servo-via-pwm-channels-jupiter/19886)

<div class="topic-metadata">

**Author:** [@FraSec](https://discuss.bluerobotics.com/u/FraSec)\
**Replies:** 3\
**Last updated:** [March 31, 2025, 10:59pm UTC](https://discuss.bluerobotics.com/t/controlling-servo-via-pwm-channels-jupiter/19886 "2025-03-31T22:59:45Z")

</div>

Hi all, We are trying to communicate with the Blue Robotics Navigator via the Jupiter interface in BlueOS. We are having some issues with communicating with the PWM channels. Following the libraries we were able to get …

---

## [More power = less ESC heat?](https://discuss.bluerobotics.com/t/more-power-less-esc-heat/17657)

<div class="topic-metadata">

**Author:** [@Knotty](https://discuss.bluerobotics.com/u/Knotty)\
**Replies:** 5\
**Last updated:** [March 19, 2025, 4:14pm UTC](https://discuss.bluerobotics.com/t/more-power-less-esc-heat/17657 "2025-03-19T16:14:31Z")

</div>

Using the basic ESC inside a Pelican case, along with a 13.4V LiFePO4 battery, I noticed that the ESC generates more heat at 60% throttle than it does at 100%. I put a Govee bluetooth temp recorder inside the case and th…

---

## [Blue OS failed to pull extensions](https://discuss.bluerobotics.com/t/blue-os-failed-to-pull-extensions/19603)

<div class="topic-metadata">

**Author:** [@qimg](https://discuss.bluerobotics.com/u/qimg)\
**Replies:** 2\
**Last updated:** [March 5, 2025, 1:35am UTC](https://discuss.bluerobotics.com/t/blue-os-failed-to-pull-extensions/19603 "2025-03-05T01:35:46Z")

</div>

Hello, I am a freshmen here. My Blue os version is 1.3.1(1.4.0 beta 6 is failed too), and my network is OK, I use the test in Blue OS. But when I want to install extensions, all extensions are failed, and the messages ar…

---

## [Facing issue in RC connection](https://discuss.bluerobotics.com/t/facing-issue-in-rc-connection/19475)

<div class="topic-metadata">

**Author:** [@Kshitij\_Shetty](https://discuss.bluerobotics.com/u/Kshitij_Shetty)\
**Replies:** 2\
**Last updated:** [February 23, 2025, 6:00am UTC](https://discuss.bluerobotics.com/t/facing-issue-in-rc-connection/19475 "2025-02-23T06:00:40Z")

</div>

Hi everyone, I’m working on building an underwater ROV using Blue Robotics T200 thrusters (with ESCs), a FlySky i6 RC system, and a Pixhawk running a custom frame configuration. I intend to have the bot RC controlled wi…

---

## [Using High Frequency injection for Better Control of Underwater Propellers at Low Speed and StartUp](https://discuss.bluerobotics.com/t/using-high-frequency-injection-for-better-control-of-underwater-propellers-at-low-speed-and-startup/18853)

<div class="topic-metadata">

**Author:** [@MarcoMotaSubmarine](https://discuss.bluerobotics.com/u/MarcoMotaSubmarine)\
**Replies:** 0\
**Last updated:** [December 16, 2024, 5:19pm UTC](https://discuss.bluerobotics.com/t/using-high-frequency-injection-for-better-control-of-underwater-propellers-at-low-speed-and-startup/18853 "2024-12-16T17:19:14Z")

</div>

Hi everyone, I was wondering if anyone has ever done tests with high-frequency injection techniques to underwater motors to improve a motor’s current and speed behaviour at low speeds. I am under the impression that Hi…

---

## [Ticking noise and jittering from T200](https://discuss.bluerobotics.com/t/ticking-noise-and-jittering-from-t200/18748)

<div class="topic-metadata">

**Author:** [@Koji](https://discuss.bluerobotics.com/u/Koji)\
**Replies:** 1\
**Last updated:** [December 3, 2024, 6:07pm UTC](https://discuss.bluerobotics.com/t/ticking-noise-and-jittering-from-t200/18748 "2024-12-03T18:07:15Z")

</div>

Using T200 thrusters in a ROV boat for surveying, I have ran into the issue a couple times of an audible ticking and physical jittering from the thruster when a signal is sent via controller. It has either been both mot…

---

## [Basic ESC to a heat sink](https://discuss.bluerobotics.com/t/basic-esc-to-a-heat-sink/8839)

<div class="topic-metadata">

**Author:** [@nras](https://discuss.bluerobotics.com/u/nras)\
**Replies:** 10\
**Last updated:** [November 6, 2024, 1:42pm UTC](https://discuss.bluerobotics.com/t/basic-esc-to-a-heat-sink/8839 "2024-11-06T13:42:50Z")

</div>

We are planning to use the “Basic ESC” in our canister design. We need some inputs on how to mount the ESC to a suitable heatsink; as suggested in the “Installation and Thermal Consideration”. The ESC doesn’t have a mou…

[Next page](https://discuss.bluerobotics.com/tag/basic-esc/55.md?match_all_tags=true&page=1&tags%5B%5D=basic-esc)
