# Xbox 1 buttons not recognised in QGC **URL:** \ **Category:** QGroundControl\ **Tags:** surface-controller\ **Created:** [July 14, 2022, 2:23pm UTC](https://discuss.bluerobotics.com/t/xbox-1-buttons-not-recognised-in-qgc/12526 "2022-07-14T14:23:29Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![plavo](https://avatars.discourse-cdn.com/v4/letter/p/e9a140/32.png) [@plavo](https://discuss.bluerobotics.com/u/plavo)\ **Post date:** [July 14, 2022, 2:23pm UTC](https://discuss.bluerobotics.com/t/xbox-1-buttons-not-recognised-in-qgc/12526/1 "2022-07-14T14:23:29Z")
I have a wireless Xbox 1 controller which my pc recognizes wired and wireless. I am using the windows version of QGC [here](https://bluerobotics.com/learn/bluerov2-software-setup/) The RT and LT buttons are not recognized in QGC when pressed but do appear when using the Xbox accessories app. I believe these are buttons 7 and 8 The controller is only recognised as a xinput device when connected to QGC wired or wirelessly. ---
**Author:** ![EliotBR](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.bluerobotics.com/eliotbr/32/6937_2.png) [@EliotBR](https://discuss.bluerobotics.com/u/EliotBR)\ **Post date:** [July 19, 2022, 11:20am UTC](https://discuss.bluerobotics.com/t/xbox-1-buttons-not-recognised-in-qgc/12526/2 "2022-07-19T11:20:15Z")
Hi @plavo, > [@plavo](#): > > The RT and LT buttons are not recognized in QGC when pressed As far as I’m aware that’s always been the case - this is from 2018: > [@Newton Gripper servo setup](https://discuss.bluerobotics.com/t/newton-gripper-servo-setup/2897/2): > > The two spring loaded triggers on the xbox controller can not be used for any function at the moment. I believe they register in QGroundControl as variable joystick axes instead of as buttons, but one-directional additional control axes aren’t currently supported by either QGroundControl or ArduSub, so they’re just ignored.