# Using gstreamer1.0 on Raspberry Pi 3B **URL:** \ **Category:** Modifications\ **Created:** [January 26, 2020, 2:24pm UTC](https://discuss.bluerobotics.com/t/using-gstreamer1-0-on-raspberry-pi-3b/6753 "2020-01-26T14:24:34Z")\ **Posts on this page:** 1\ **Showing post:** 4
**Author:** ![patrickelectric](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.bluerobotics.com/patrickelectric/32/2162_2.png) [@patrickelectric](https://discuss.bluerobotics.com/u/patrickelectric)\ **Post date:** [January 27, 2020, 11:51am UTC](https://discuss.bluerobotics.com/t/using-gstreamer1-0-on-raspberry-pi-3b/6753/4 "2020-01-27T11:51:26Z")
Hi, fdsrc only works with files or pipes, check the complete pipeline from the post that you are talking about. > [@ArduSub submodules](https://discuss.bluerobotics.com/t/ardusub-submodules/194/15): > > No problem I fairly closely followed the instructions from here: [https://github.com/mavlink/qgroundcontrol/tree/master/src/VideoStreaming](https://github.com/mavlink/qgroundcontrol/tree/master/src/VideoStreaming) I’m running Ubuntu on both the RPi and the Laptop, so followed that path. Then, instead of running the streaming script in the instructions, I ran the following altered script to stream from the RPi camera: raspivid -t 0 -h 720 -w 1080 -rot 180 -fps 24 -hf -b 2000000 -o - | gst-launch-1.0 -v fdsrc ! video/x-h264,width=1080,height=720,framerate=24/1 ! h264… --- _[View the full topic](https://discuss.bluerobotics.com/t/using-gstreamer1-0-on-raspberry-pi-3b/6753)._