# Trouble accessing/ connecting to blueos.local for updates **URL:** \ **Category:** General Discussion\ **Created:** [June 10, 2022, 5:59pm UTC](https://discuss.bluerobotics.com/t/trouble-accessing-connecting-to-blueos-local-for-updates/12304 "2022-06-10T17:59:21Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![Mary-Claire](https://avatars.discourse-cdn.com/v4/letter/m/d2c977/32.png) [@Mary-Claire](https://discuss.bluerobotics.com/u/Mary-Claire)\ **Post date:** [June 10, 2022, 5:59pm UTC](https://discuss.bluerobotics.com/t/trouble-accessing-connecting-to-blueos-local-for-updates/12304/1 "2022-06-10T17:59:21Z")
I have followed all the set up steps and still cannot connect to 192.168.2.2] or blueos.local when I paste in the browser address bar. Does anyone know how I solve this problem? I am working on a PC Thanks! ---
**Author:** ![Mary-Claire](https://avatars.discourse-cdn.com/v4/letter/m/d2c977/32.png) [@Mary-Claire](https://discuss.bluerobotics.com/u/Mary-Claire)\ **Post date:** [June 10, 2022, 6:05pm UTC](https://discuss.bluerobotics.com/t/trouble-accessing-connecting-to-blueos-local-for-updates/12304/2 "2022-06-10T18:05:31Z")
I was able to eject and update raspberry pi, put it back in but still no luck connecting to blueos.local any pointers on how to troubleshoot this? Thanks! ---
**Author:** ![EliotBR](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.bluerobotics.com/eliotbr/32/6937_2.png) [@EliotBR](https://discuss.bluerobotics.com/u/EliotBR)\ **Post date:** [June 13, 2022, 1:23am UTC](https://discuss.bluerobotics.com/t/trouble-accessing-connecting-to-blueos-local-for-updates/12304/3 "2022-06-13T01:23:15Z")
Hi @Mary-Claire, Have you completed the [network configuration](https://docs.bluerobotics.com/ardusub-zola/software/onboard/BlueOS-1.0/getting-started/)? You won’t be able to connect without the interface to the vehicle being set to an IP address of 192.168.2.1, and there may be other issues related to fire walls. ---
**Author:** ![EliotBR](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.bluerobotics.com/eliotbr/32/6937_2.png) [@EliotBR](https://discuss.bluerobotics.com/u/EliotBR)\ **Post date:** [February 16, 2023, 3:05am UTC](https://discuss.bluerobotics.com/t/trouble-accessing-connecting-to-blueos-local-for-updates/12304/4 "2023-02-16T03:05:26Z")
A post was merged into an existing topic: [BlueOS install, i need help](https://discuss.bluerobotics.com/t/blueos-install-i-need-help/12950/6) ---
**Author:** ![stina](https://avatars.discourse-cdn.com/v4/letter/s/a88e57/32.png) [@stina](https://discuss.bluerobotics.com/u/stina)\ **Post date:** [September 3, 2023, 5:11pm UTC](https://discuss.bluerobotics.com/t/trouble-accessing-connecting-to-blueos-local-for-updates/12304/5 "2023-09-03T17:11:40Z")
Turned out to be a hardware problem. Problem solved. I had blueOS up and running. But switched from RP3 to RP4 and downloaded BlueOS to a new SD card. No I cannot connect to the blueos with any of the PI’s inserted. I’m now trying to get the old RP3 (which was fully working) connected again. Heres my ethernet connections: enx00e04c3600d5: flags=4163\ mtu 1500 inet 192.168.2.1 netmask 255.255.255.0 broadcast 192.168.2.255 inet6 fe80::e8bc:f61f:3c07:baf0 prefixlen 64 scopeid 0x20 ether 00:e0:4c:36:00:d5 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 223 bytes 24511 (24.5 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 enx3448edb746dd: flags=4099\ mtu 1500 ether 34:48:ed:b7:46:dd txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 And here’s my ping: (base) stina@stina-XPS-13-7390:~$ ping 192.168.2.1 PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. 64 bytes from 192.168.2.1: icmp\_seq=1 ttl=64 time=0.070 ms 64 bytes from 192.168.2.1: icmp\_seq=2 ttl=64 time=0.072 ms 64 bytes from 192.168.2.1: icmp\_seq=3 ttl=64 time=0.073 ms 64 bytes from 192.168.2.1: icmp\_seq=4 ttl=64 time=0.073 ms 64 bytes from 192.168.2.1: icmp\_seq=5 ttl=64 time=0.072 ms 64 bytes from 192.168.2.1: icmp\_seq=6 ttl=64 time=0.074 ms ^C — 192.168.2.1 ping statistics — 6 packets transmitted, 6 received, 0% packet loss, time 5104ms rtt min/avg/max/mdev = 0.070/0.072/0.074/0.001 ms This is what I type in my browser window: [https://192.168.2.2/](https://192.168.2.2/) This RP3 was working perfectly before. I’ve tried two different cables, they have both proven ok before. I’m running out of ideas. Settings says I am connected to enx00e04c3600d5 with 100 Mb/s What am I doing wrong? ---
**Author:** ![stina](https://avatars.discourse-cdn.com/v4/letter/s/a88e57/32.png) [@stina](https://discuss.bluerobotics.com/u/stina)\ **Post date:** [September 4, 2023, 10:21am UTC](https://discuss.bluerobotics.com/t/trouble-accessing-connecting-to-blueos-local-for-updates/12304/6 "2023-09-04T10:21:25Z")
Turned out to be a loose connection in hardware. Problem solved.