# Raspberry Pi 3 Model B+ **URL:** \ **Category:** Blue Robotics Software\ **Created:** [July 1, 2018, 4:55pm UTC](https://discuss.bluerobotics.com/t/raspberry-pi-3-model-b/2888 "2018-07-01T16:55:10Z")\ **Posts on this page:** 10\ **Page:** 1
**Author:** ![saeidjson](https://avatars.discourse-cdn.com/v4/letter/s/9f8e36/32.png) [@saeidjson](https://discuss.bluerobotics.com/u/saeidjson)\ **Post date:** [July 1, 2018, 4:55pm UTC](https://discuss.bluerobotics.com/t/raspberry-pi-3-model-b/2888/1 "2018-07-01T16:55:10Z")
hi Can you upload your image raspberry pi to this Raspberry Pi 3 Model B+ ? ---
**Author:** ![kklemens](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.bluerobotics.com/kklemens/32/2247_2.png) [@kklemens](https://discuss.bluerobotics.com/u/kklemens)\ **Post date:** [July 1, 2018, 9:09pm UTC](https://discuss.bluerobotics.com/t/raspberry-pi-3-model-b/2888/2 "2018-07-01T21:09:26Z")
Hi @saeidjson, There is an issue ([#106](https://github.com/bluerobotics/companion/issues/106)) already entered on GitHub for adding support. Our software team is working on other updates and upgrades right now, but it is on the list to get to. ---
**Author:** ![saeidjson](https://avatars.discourse-cdn.com/v4/letter/s/9f8e36/32.png) [@saeidjson](https://discuss.bluerobotics.com/u/saeidjson)\ **Post date:** [July 2, 2018, 9:02am UTC](https://discuss.bluerobotics.com/t/raspberry-pi-3-model-b/2888/3 "2018-07-02T09:02:25Z")
hi @kklemens I din’t notice Is it possible to use raspberry pi b+ ? ---
**Author:** ![jwalser](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.bluerobotics.com/jwalser/32/2234_2.png) [@jwalser](https://discuss.bluerobotics.com/u/jwalser)\ **Post date:** [July 2, 2018, 1:43pm UTC](https://discuss.bluerobotics.com/t/raspberry-pi-3-model-b/2888/4 "2018-07-02T13:43:30Z")
Not at the moment, no. ---
**Author:** ![ehughwilliams](https://avatars.discourse-cdn.com/v4/letter/e/6f9a4e/32.png) [@ehughwilliams](https://discuss.bluerobotics.com/u/ehughwilliams)\ **Post date:** [November 12, 2018, 8:07am UTC](https://discuss.bluerobotics.com/t/raspberry-pi-3-model-b/2888/5 "2018-11-12T08:07:46Z")
HI – Is there any action on this yet? If not, will there be? If not can you tell us what the issue at least appears to be that prevents Ardusub from booting since the B and B+ have the same processor and are not that different so that maybe we can try to sort it out ourselves? Is the B+ firmware so different from the B? What happens if The Pi Makers stop making the B (which they are understandably sort of calling obsolete now that they have the B+) – I’ve noticed a couple of places like Adafruit already exclusively sell the B+ and have dropped the B. Help! ---
**Author:** ![jwalser](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.bluerobotics.com/jwalser/32/2234_2.png) [@jwalser](https://discuss.bluerobotics.com/u/jwalser)\ **Post date:** [November 12, 2018, 2:37pm UTC](https://discuss.bluerobotics.com/t/raspberry-pi-3-model-b/2888/6 "2018-11-12T14:37:44Z")
You may check the progress here: [Update setup script · Issue #8 · bluerobotics/companion · GitHub](https://github.com/bluerobotics/companion/issues/8) and here: [Add support for RPi 3 Model B+ and 4 · Issue #106 · bluerobotics/companion · GitHub](https://github.com/bluerobotics/companion/issues/106). > Is the B+ firmware so different from the B? I’m not sure what the differences are, this has not been the issue with adding support. It’s a problem with the way the companion software was developed, it is not straightforward to install. Your easiest route may be to update the pi firmware on an existing installation. This is not an option for our own deployment, though. > What happens if The Pi Makers stop making the B Then adding support for the B+ this will become a priority! ---
**Author:** ![brewin](https://avatars.discourse-cdn.com/v4/letter/b/b5a626/32.png) [@brewin](https://discuss.bluerobotics.com/u/brewin)\ **Post date:** [June 5, 2019, 6:25am UTC](https://discuss.bluerobotics.com/t/raspberry-pi-3-model-b/2888/7 "2019-06-05T06:25:42Z")
Might be a dumb follow up question, but does a raspberry pi 2 work? ---
**Author:** ![mhmmdali](https://avatars.discourse-cdn.com/v4/letter/m/e9bcb4/32.png) [@mhmmdali](https://discuss.bluerobotics.com/u/mhmmdali)\ **Post date:** [May 27, 2020, 6:11pm UTC](https://discuss.bluerobotics.com/t/raspberry-pi-3-model-b/2888/8 "2020-05-27T18:11:58Z")
Does ardusub support rasberry pi 3b+? fast response ---
**Author:** ![kklemens](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.bluerobotics.com/kklemens/32/2247_2.png) [@kklemens](https://discuss.bluerobotics.com/u/kklemens)\ **Post date:** [May 27, 2020, 11:30pm UTC](https://discuss.bluerobotics.com/t/raspberry-pi-3-model-b/2888/9 "2020-05-27T23:30:22Z")
The Raspberry Pi 3B is the only supported model at this time. The 3B+ and any other RPi computer are unsupported. ---
**Author:** ![mhmmdali](https://avatars.discourse-cdn.com/v4/letter/m/e9bcb4/32.png) [@mhmmdali](https://discuss.bluerobotics.com/u/mhmmdali)\ **Post date:** [August 6, 2020, 11:09am UTC](https://discuss.bluerobotics.com/t/raspberry-pi-3-model-b/2888/10 "2020-08-06T11:09:41Z")
I have a proplem for relay in pixhawk. I want to switching relay but ı dont control relay . everything the i made is true. but relay not working. relay connection to auxout 5 (relay1). i wan t to control relay with joystick.help me quickly please.