# Pixhawk + Power Module

**URL:** <https://discuss.bluerobotics.com/t/pixhawk-power-module/6035>\
**Category:** Blue Robotics Products\
**Created:** [September 20, 2019, 3:34am UTC](https://discuss.bluerobotics.com/t/pixhawk-power-module/6035 "2019-09-20T03:34:06Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![VMartini](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.bluerobotics.com/vmartini/32/4529_2.png) [@VMartini](https://discuss.bluerobotics.com/u/VMartini)\
**Post date:** [September 20, 2019, 3:34am UTC](https://discuss.bluerobotics.com/t/pixhawk-power-module/6035/1 "2019-09-20T03:34:06Z")

</div>

Recently when we were operating our BR2 and after a couple of minutes at full throttle, we had a shutdown.

- Checked Pixhawk and noted it was fried.
- Power module had 15v in the pixhawk connector.

Is it a known issue for the older PSM version? I’m not sure if we were using the new or the old version (have to check).