# Ping360 ethernet config

**URL:** <https://discuss.bluerobotics.com/t/ping360-ethernet-config/13442>\
**Category:** Ping Viewer\
**Created:** [January 1, 2023, 10:33pm UTC](https://discuss.bluerobotics.com/t/ping360-ethernet-config/13442 "2023-01-01T22:33:43Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![ugurdemirezen](https://avatars.discourse-cdn.com/v4/letter/u/9de053/32.png) [@ugurdemirezen](https://discuss.bluerobotics.com/u/ugurdemirezen)\
**Post date:** [January 1, 2023, 10:33pm UTC](https://discuss.bluerobotics.com/t/ping360-ethernet-config/13442/1 "2023-01-01T22:33:43Z")

</div>

Hi everyone,

We are trying to use ping360 with ethernet configuration. We directly connected the sonar to eth switch. We also change the connector to eth that inside of the sonar. We can see the sonar on ping page on web gui.

 ![image](https://us1.discourse-cdn.com/flex019/uploads/bluerobotics/original/2X/0/048f2c5b20e9407fc630f9da7ae35e12f9f1e67f.jpeg)

But pingviewer couldn’t find the sonar. What should we do?

Thanks,  
Best regards

---

<div class="post-metadata">

**Author:** ![ugurdemirezen](https://avatars.discourse-cdn.com/v4/letter/u/9de053/32.png) [@ugurdemirezen](https://discuss.bluerobotics.com/u/ugurdemirezen)\
**Post date:** [January 5, 2023, 7:23am UTC](https://discuss.bluerobotics.com/t/ping360-ethernet-config/13442/2 "2023-01-05T07:23:35Z")

</div>

I connected the sonar directly to pc with ethernet cable. Than I set a static IP. It works now!