# PING 360 sonar connected to ethernet switch **URL:** \ **Category:** General Discussion\ **Created:** [November 2, 2022, 1:05pm UTC](https://discuss.bluerobotics.com/t/ping-360-sonar-connected-to-ethernet-switch/13137 "2022-11-02T13:05:39Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![lbentes](https://avatars.discourse-cdn.com/v4/letter/l/ba9def/32.png) [@lbentes](https://discuss.bluerobotics.com/u/lbentes)\ **Post date:** [November 2, 2022, 1:05pm UTC](https://discuss.bluerobotics.com/t/ping-360-sonar-connected-to-ethernet-switch/13137/1 "2022-11-02T13:05:39Z")
Hi, Is it possible to connect PING360 Sonar directly to one of the ports in ethernet switch, using the existent JST-GH connector (internally Ping 360 was set to ethernet)? Thanks Luis ---
**Author:** ![FairweatherIT](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.bluerobotics.com/fairweatherit/32/5545_2.png) [@FairweatherIT](https://discuss.bluerobotics.com/u/FairweatherIT)\ **Post date:** [November 2, 2022, 9:04pm UTC](https://discuss.bluerobotics.com/t/ping-360-sonar-connected-to-ethernet-switch/13137/2 "2022-11-02T21:04:05Z")
Yes, I have done this with a different switch, but it passes the data through and can be viewed in Ping Viewer. ---
**Author:** ![EliotBR](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.bluerobotics.com/eliotbr/32/6937_2.png) [@EliotBR](https://discuss.bluerobotics.com/u/EliotBR)\ **Post date:** [November 2, 2022, 10:22pm UTC](https://discuss.bluerobotics.com/t/ping-360-sonar-connected-to-ethernet-switch/13137/3 "2022-11-02T22:22:59Z")
Hi @lbentes, Yes, it should work fine to connect the Ping360 (in ethernet mode) to the ethernet switch - we even have [a section on doing so](https://bluerobotics.com/learn/ping360-installation-guide-for-the-bluerov2/#wiring-connections-for-ethernet) in our [Ping360 Installation Guide for the BlueROV2](https://bluerobotics.com/learn/ping360-installation-guide-for-the-bluerov2/) 🙂