# New design Balder Rov v3.1

**URL:** <https://discuss.bluerobotics.com/t/new-design-balder-rov-v3-1/8788>\
**Category:** Build/Make\
**Created:** [December 27, 2020, 6:08pm UTC](https://discuss.bluerobotics.com/t/new-design-balder-rov-v3-1/8788 "2020-12-27T18:08:57Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![balder](https://avatars.discourse-cdn.com/v4/letter/b/d78d45/32.png) [@balder](https://discuss.bluerobotics.com/u/balder)\
**Post date:** [December 27, 2020, 6:08pm UTC](https://discuss.bluerobotics.com/t/new-design-balder-rov-v3-1/8788/1 "2020-12-27T18:08:57Z")

</div>

My new balder ROV v3.1  
carbonfiber tubes, filled with buoyancy foam.  
camera and light can be tilted 270 degrees, so you can see behind at the tether  
it is 2x 80w led light

 ![Olas drone_0020](https://us1.discourse-cdn.com/flex019/uploads/bluerobotics/original/2X/e/e61ab97cc2aa0dd4dd8eea77500e5e6d34e1122f.jpeg) ![Olas drone_0023](https://us1.discourse-cdn.com/flex019/uploads/bluerobotics/original/2X/e/e13f46439332e853df6b5f869144213d2b238861.jpeg)  
Easy to adjust the angle of the truster. just loosen 1 nut. it divided into 5 degree steps.

 ![Olas drone_0025](https://us1.discourse-cdn.com/flex019/uploads/bluerobotics/original/2X/c/cfddc428654c5efbe184a23175bddcf422f95fd6.jpeg)

designing of camera/Light housing with built inn sevo

 ![kamera fusion](https://us1.discourse-cdn.com/flex019/uploads/bluerobotics/original/2X/4/4430f32637edf6cc0331a9a17af92cc23ddc53ab.png) ![Olas drone_0021](https://us1.discourse-cdn.com/flex019/uploads/bluerobotics/original/2X/8/8dde8e9d114807a9bce349401417277d644deaed.jpeg)

[![](https://us1.discourse-cdn.com/flex019/uploads/bluerobotics/original/2X/a/aff3b76a68f110e89da5bf2076142f406625b597.jpeg "New Project") ](https://www.youtube.com/watch?v=tIKPz7V30Zw)

---

<div class="post-metadata">

**Author:** ![gcelec](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.bluerobotics.com/gcelec/32/2038_2.png) [@gcelec](https://discuss.bluerobotics.com/u/gcelec)\
**Post date:** [December 29, 2020, 4:35am UTC](https://discuss.bluerobotics.com/t/new-design-balder-rov-v3-1/8788/2 "2020-12-29T04:35:58Z")

</div>

Nice work! I like it.

---

<div class="post-metadata">

**Author:** ![YANGsurpass](https://avatars.discourse-cdn.com/v4/letter/y/0ea827/32.png) [@YANGsurpass](https://discuss.bluerobotics.com/u/YANGsurpass)\
**Post date:** [March 17, 2024, 8:16pm UTC](https://discuss.bluerobotics.com/t/new-design-balder-rov-v3-1/8788/3 "2024-03-17T20:16:32Z")

</div>

What connection is used at the corner of the two carbon fiber tubes