# M500 Motor Parameters — Technical Data for Level-Wind Project with T500 Thrusters
**URL:** https://discuss.bluerobotics.com/t/m500-motor-parameters-technical-data-for-level-wind-project-with-t500-thrusters/21653
**Category:** Thrusters and Motors
**Tags:** t500
**Created:** [September 24, 2025, 1:15am UTC](https://discuss.bluerobotics.com/t/m500-motor-parameters-technical-data-for-level-wind-project-with-t500-thrusters/21653 "2025-09-24T01:15:12Z")
**Posts on this page:** 3
**Page:** 1
### Author:  [@DanBRS](https://discuss.bluerobotics.com/u/DanBRS)
#### Post date: [September 24, 2025, 1:15am UTC](https://discuss.bluerobotics.com/t/m500-motor-parameters-technical-data-for-level-wind-project-with-t500-thrusters/21653/1 "2025-09-24T01:15:12Z")
Hi everyone,
I’m currently working on a **level-wind system** and using **M500 motors**. However, I couldn’t find complete technical data for the **M500 motor** — I only have access to the M200 documentation.
I’d like to know if anyone has the following parameters for the M500, or could point me to where I can find them:
- Maximum torque
- RPM at different voltages (e.g., 16 V, 24 V)
- Current draw at maximum load
- Efficiency at different load ranges (low, medium, maximum)
Thanks in advance for any help or documentation you can share!
---
### Author:  [@EliotBR](https://discuss.bluerobotics.com/u/EliotBR)
#### Post date: [September 24, 2025, 1:26am UTC](https://discuss.bluerobotics.com/t/m500-motor-parameters-technical-data-for-level-wind-project-with-t500-thrusters/21653/2 "2025-09-24T01:26:53Z")
Hi @DanBRS, welcome to the forum 🙂
We don’t yet sell a motor-only variant of our [T500 Thruster](https://bluerobotics.com/store/thrusters/t100-t200-thrusters/t500-thruster/), so the M500 does not currently exist as a product.
Assuming you mean you’re using modified T500s then the available specifications are in the technical details section on the product page. Note that as it’s not sold as a general purpose motor, it is also not directly specified as one (so we don’t currently provide a stall torque value, and the RPM measurements are assuming the load of water resistance to the included propeller, which may not match your winch load).
---
### Author:  [@EliotBR](https://discuss.bluerobotics.com/u/EliotBR)
#### Post date: [June 11, 2026, 8:10pm UTC](https://discuss.bluerobotics.com/t/m500-motor-parameters-technical-data-for-level-wind-project-with-t500-thrusters/21653/3 "2026-06-11T20:10:20Z")
> [@EliotBR](#):
>
> … the M500 does not currently exist as a product.
Noting that [the M500 has now been released](https://discuss.bluerobotics.com/t/new-product-m500-motor/23153) 🙂