# LX200V50 Module

**URL:** <https://discuss.bluerobotics.com/t/lx200v50-module/15154>\
**Category:** General Discussion\
**Created:** [September 29, 2023, 12:03pm UTC](https://discuss.bluerobotics.com/t/lx200v50-module/15154 "2023-09-29T12:03:51Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Anrriu](https://avatars.discourse-cdn.com/v4/letter/a/e9c0ed/32.png) [@Anrriu](https://discuss.bluerobotics.com/u/Anrriu)\
**Post date:** [September 29, 2023, 12:03pm UTC](https://discuss.bluerobotics.com/t/lx200v50-module/15154/1 "2023-09-29T12:03:51Z")

</div>

I’m trying to connect a Bluerov2 with the LX200V50 Module, the tether has 300 mts and 1 twisted pair for communication and I cannot get it…

---

<div class="post-metadata">

**Author:** ![EliotBR](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.bluerobotics.com/eliotbr/32/6937_2.png) [@EliotBR](https://discuss.bluerobotics.com/u/EliotBR)\
**Post date:** [October 11, 2023, 7:21am UTC](https://discuss.bluerobotics.com/t/lx200v50-module/15154/2 "2023-10-11T07:21:28Z")

</div>

Hi @Anrriu,

I don’t have experience with that module, but it’s also not clear what you’ve tried so far or what you’re struggling/having issues with.

Common practice when first attempting to integrate a new component into an established system is to test first it individually, with a system that minimises unknowns (e.g. it may be worth precisely following an application circuit/diagram, and/or using a very short length of cable that is expected to have minimal issues), and only moving to the full desired setup once you know the components themselves are working as expected.