# Lumen Subsea Light (Pre-Connected Sets)

**URL:** <https://discuss.bluerobotics.com/t/lumen-subsea-light-pre-connected-sets/13784>\
**Category:** Lights\
**Tags:** ardusub\
**Created:** [February 28, 2023, 9:27am UTC](https://discuss.bluerobotics.com/t/lumen-subsea-light-pre-connected-sets/13784 "2023-02-28T09:27:21Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Aquila](https://avatars.discourse-cdn.com/v4/letter/a/8edcca/32.png) [@Aquila](https://discuss.bluerobotics.com/u/Aquila)\
**Post date:** [February 28, 2023, 9:27am UTC](https://discuss.bluerobotics.com/t/lumen-subsea-light-pre-connected-sets/13784/1 "2023-02-28T09:27:21Z")

</div>

Got a pair of Lumen Subsea Lights (Pre-Connected Sets), Power through a direct 12V power supply, and the signal connected to Pixhawk 4 AUX 2 (Channel 10).

However,

1. **Lights were flickering**
2. **Able to adjust brightness however it takes a very long response time**

Does anyone know what’s the reason causing this?

**Both Pixhawk 4 & Lumen Subsea Light is brand new from box**

---

<div class="post-metadata">

**Author:** ![Aquila](https://avatars.discourse-cdn.com/v4/letter/a/8edcca/32.png) [@Aquila](https://discuss.bluerobotics.com/u/Aquila)\
**Post date:** [March 1, 2023, 2:53am UTC](https://discuss.bluerobotics.com/t/lumen-subsea-light-pre-connected-sets/13784/2 "2023-03-01T02:53:08Z")

</div>

Hi Eliot! Do you have any idea about this issue?  
@EliotBR

---

<div class="post-metadata">

**Author:** ![EliotBR](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.bluerobotics.com/eliotbr/32/6937_2.png) [@EliotBR](https://discuss.bluerobotics.com/u/EliotBR)\
**Post date:** [March 2, 2023, 10:46am UTC](https://discuss.bluerobotics.com/t/lumen-subsea-light-pre-connected-sets/13784/3 "2023-03-02T10:46:54Z")

</div>

Hi @Aquila,

I’d recommend reading [this thread](https://discuss.bluerobotics.com/t/full-4-set-lumen-flickering-in-heavy-configuration-mode/12382/5) for some potential ideas 🙂
