#  lose the signal

**URL:** <https://discuss.bluerobotics.com/t/lose-the-signal/2061>\
**Category:** General Discussion\
**Created:** [January 24, 2018, 8:19pm UTC](https://discuss.bluerobotics.com/t/lose-the-signal/2061 "2018-01-24T20:19:56Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![keko1es](https://avatars.discourse-cdn.com/v4/letter/k/da6949/32.png) [@keko1es](https://discuss.bluerobotics.com/u/keko1es)\
**Post date:** [January 24, 2018, 8:19pm UTC](https://discuss.bluerobotics.com/t/lose-the-signal/2061/1 "2018-01-24T20:19:56Z")

</div>

Good afternoon, my name is Sergio, I just bought the Bluerov2, I have 2 questions.

because when I connect the ROV to my CPU (Macbook) after 10 minutes I lose the signal, to have a signal again, I have to disconnect the battery and connect it.

because the QGroun program does not let me install the Xbox360 control.

Could you give me some advice?

regards

---

<div class="post-metadata">

**Author:** ![jwalser](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.bluerobotics.com/jwalser/32/2234_2.png) [@jwalser](https://discuss.bluerobotics.com/u/jwalser)\
**Post date:** [January 25, 2018, 6:15am UTC](https://discuss.bluerobotics.com/t/lose-the-signal/2061/2 "2018-01-25T06:15:24Z")

</div>

Hello, sorry we were not able to help you today. This is a strange problem that you describe. If you can please install Team Viewer, and contact [support@bluerobotics.com](mailto:support@bluerobotics.com) to set up a time to meet remotely. This will be the fastest way to sort it out.

Have you installed the xbox controller driver as described in the “Joystick Setup” step in the [software setup](http://docs.bluerobotics.com/brov2/software-setup/) instructions?