# In line thrusters

**URL:** <https://discuss.bluerobotics.com/t/in-line-thrusters/12820>\
**Category:** General Discussion\
**Created:** [August 26, 2022, 1:22am UTC](https://discuss.bluerobotics.com/t/in-line-thrusters/12820 "2022-08-26T01:22:16Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![johng](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.bluerobotics.com/johng/32/7200_2.png) [@johng](https://discuss.bluerobotics.com/u/johng)\
**Post date:** [August 26, 2022, 1:22am UTC](https://discuss.bluerobotics.com/t/in-line-thrusters/12820/1 "2022-08-26T01:22:16Z")

</div>

Hi all  
I am designing a very purpose specific ROV where pure speed is a critical part of the functionality. I am wondering if anybody has ever used a set up where T200s were in line nose to tail and what their experience taught them. In particular, I really would like to know to what extent the overall efficiency is impacted by the proximity of the second thruster because of the disturbed water flow. Any input welcome!  
thanks  
John

---

<div class="post-metadata">

**Author:** ![EliotBR](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.bluerobotics.com/eliotbr/32/6937_2.png) [@EliotBR](https://discuss.bluerobotics.com/u/EliotBR)\
**Post date:** [August 26, 2022, 5:49am UTC](https://discuss.bluerobotics.com/t/in-line-thrusters/12820/2 "2022-08-26T05:49:35Z")

</div>

Hi @johng,

I haven’t done actual testing with a setup like you’ve described but I’d recommend using counter rotation, as discussed [here](https://discuss.bluerobotics.com/t/thruster-location-and-effects/9720/2) 🙂

---

<div class="post-metadata">

**Author:** ![johng](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.bluerobotics.com/johng/32/7200_2.png) [@johng](https://discuss.bluerobotics.com/u/johng)\
**Post date:** [August 26, 2022, 6:28am UTC](https://discuss.bluerobotics.com/t/in-line-thrusters/12820/3 "2022-08-26T06:28:35Z")

</div>

Much appreciated Eliot. Makes sense.
