# How set the pwm output

**URL:** <https://discuss.bluerobotics.com/t/how-set-the-pwm-output/3586>\
**Category:** QGroundControl\
**Created:** [October 19, 2018, 11:18am UTC](https://discuss.bluerobotics.com/t/how-set-the-pwm-output/3586 "2018-10-19T11:18:01Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Eli](https://avatars.discourse-cdn.com/v4/letter/e/a9a28c/32.png) [@Eli](https://discuss.bluerobotics.com/u/Eli)\
**Post date:** [October 19, 2018, 11:18am UTC](https://discuss.bluerobotics.com/t/how-set-the-pwm-output/3586/1 "2018-10-19T11:18:01Z")

</div>

Hi to all’…i read to much topic in this forum about to control other servo whit qgc but i can’t set It…i tryed to set the servo\_n in the joestick but nuthing.  
Could you help me please?

---

<div class="post-metadata">

**Author:** ![patrickelectric](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.bluerobotics.com/patrickelectric/32/2162_2.png) [@patrickelectric](https://discuss.bluerobotics.com/u/patrickelectric)\
**Post date:** [October 19, 2018, 12:01pm UTC](https://discuss.bluerobotics.com/t/how-set-the-pwm-output/3586/2 "2018-10-19T12:01:52Z")

</div>

Hi,

Please check [ArduSub.com](https://www.ardusub.com/operators-manual/outputs.html) and take a look in **controlling servos**.