# Control external GoPro via Bluetooth

**URL:** https://discuss.bluerobotics.com/t/control-external-gopro-via-bluetooth/11624
**Category:** Blue Robotics Software
**Tags:** companion
**Created:** [February 25, 2022, 5:03am UTC](https://discuss.bluerobotics.com/t/control-external-gopro-via-bluetooth/11624 "2022-02-25T05:03:00Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![yeclek](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.bluerobotics.com/yeclek/32/8578_2.png) [@yeclek](https://discuss.bluerobotics.com/u/yeclek)
#### Post date: [February 25, 2022, 5:03am UTC](https://discuss.bluerobotics.com/t/control-external-gopro-via-bluetooth/11624/1 "2022-02-25T05:03:00Z")

</div>

Would it be possible to add Bluetooth or Wi-Fi control of an external GoPro to start/stop video recording with a raspberry pi as the companion computer?

I was thinking to use a GoPro remote and control the buttons with a relay channel but I thought it might be cleaner to do it with the onboard Bluetooth.

---

<div class="post-metadata">

### Author: ![EliotBR](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.bluerobotics.com/eliotbr/32/6937_2.png) [@EliotBR](https://discuss.bluerobotics.com/u/EliotBR)
#### Post date: [February 25, 2022, 1:49pm UTC](https://discuss.bluerobotics.com/t/control-external-gopro-via-bluetooth/11624/2 "2022-02-25T13:49:47Z")

</div>

Hi @yeclek,

There’s some discussion [here](https://discuss.bluerobotics.com/t/subsea-resident-auv/9771/3) about underwater wifi - the range is apparently about 5-10cm, and you likely need an acrylic enclosure. At a guess I imagine Bluetooth would be similar given it’s a very similar frequency band, but I’m also unsure whether it has the same kind of broadcast strength (so it may not be as effective).

From what I recall there are also a few different posts on wired connections to control GoPros. [This one](https://discuss.bluerobotics.com/t/additional-external-camera/7785/25) might be relevant, and it may also be worth searching the forum for some others 🙂

---

<div class="post-metadata">

### Author: ![yeclek](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.bluerobotics.com/yeclek/32/8578_2.png) [@yeclek](https://discuss.bluerobotics.com/u/yeclek)
#### Post date: [February 26, 2022, 2:56am UTC](https://discuss.bluerobotics.com/t/control-external-gopro-via-bluetooth/11624/3 "2022-02-26T02:56:19Z")

</div>

Thank you so much! I’ll take a look at those posts.
