# Connecting ESCs to T200

**URL:** <https://discuss.bluerobotics.com/t/connecting-escs-to-t200/11516>\
**Category:** Blue Robotics Products\
**Created:** [February 8, 2022, 10:16pm UTC](https://discuss.bluerobotics.com/t/connecting-escs-to-t200/11516 "2022-02-08T22:16:34Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![jacobnihsal](https://avatars.discourse-cdn.com/v4/letter/j/a4c791/32.png) [@jacobnihsal](https://discuss.bluerobotics.com/u/jacobnihsal)\
**Post date:** [February 8, 2022, 10:16pm UTC](https://discuss.bluerobotics.com/t/connecting-escs-to-t200/11516/1 "2022-02-08T22:16:34Z")

</div>

Is there a recommended way of connecting the ESCs to the T200 Thrusters? I am not sure whether to solder them together or use a crimping technique. Thanks!

---

<div class="post-metadata">

**Author:** ![EliotBR](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.bluerobotics.com/eliotbr/32/6937_2.png) [@EliotBR](https://discuss.bluerobotics.com/u/EliotBR)\
**Post date:** [February 9, 2022, 2:28am UTC](https://discuss.bluerobotics.com/t/connecting-escs-to-t200/11516/2 "2022-02-09T02:28:45Z")

</div>

Hi @jacobnihsal,

In our vehicles we generally use [terminal blocks](https://bluerobotics.com/store/watertight-enclosures/etray4-conn-r1-rp/) (black for the spade power connectors, and white for the bare wire thruster phase wires) 🙂