# Connect ip camera to qgroundcontrol **URL:** \ **Category:** Blue Robotics Software\ **Created:** [September 17, 2019, 6:13pm UTC](https://discuss.bluerobotics.com/t/connect-ip-camera-to-qgroundcontrol/6012 "2019-09-17T18:13:32Z")\ **Posts on this page:** 1\ **Showing post:** 3
**Author:** ![Oddmar](https://avatars.discourse-cdn.com/v4/letter/o/6de8d8/32.png) [@Oddmar](https://discuss.bluerobotics.com/u/Oddmar)\ **Post date:** [September 18, 2019, 12:34am UTC](https://discuss.bluerobotics.com/t/connect-ip-camera-to-qgroundcontrol/6012/3 "2019-09-18T00:34:48Z")
Here’s a question/awnser pasted from another thread… > Connect an IP camera with H264 to it. Can I display the image on it in GroundControl? If the ip camera supports rtsp streams, yes QGC can display it. How about opening a browser window and putting it next to, or on top of, qgroundcontrol? Here’s something similar… > [@Installing an IP camera on an underwater vehicle](https://discuss.bluerobotics.com/t/installing-an-ip-camera-on-an-underwater-vehicle/4673): > > Good day. I do ROV on ArduSub. I would like to apply IP samara in ArduSub. Is it possible to do this as in the picture? I want to install a router in the dialed unit. Connect an IP camera with H264 to it. Can I display the image on it in GroundControl? If not, then you can put another router at the top. And display the image on another computer. In the future, I want to simultaneously make an image from several cameras - a review up, forward, down, back. And how to add a picture to the forum p… --- _[View the full topic](https://discuss.bluerobotics.com/t/connect-ip-camera-to-qgroundcontrol/6012)._