# Change Firmware Afro 30A ESC OPTO

**URL:** <https://discuss.bluerobotics.com/t/change-firmware-afro-30a-esc-opto/1552>\
**Category:** General Discussion\
**Created:** [October 2, 2017, 5:54pm UTC](https://discuss.bluerobotics.com/t/change-firmware-afro-30a-esc-opto/1552 "2017-10-02T17:54:08Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![saeidjson](https://avatars.discourse-cdn.com/v4/letter/s/9f8e36/32.png) [@saeidjson](https://discuss.bluerobotics.com/u/saeidjson)\
**Post date:** [October 2, 2017, 5:54pm UTC](https://discuss.bluerobotics.com/t/change-firmware-afro-30a-esc-opto/1552/1 "2017-10-02T17:54:09Z")

</div>

hi  
I want to change the firmware of this ESC Afro 30A  
I want to upload bluerobotics firmware  
I wanted guidance  
Thank you

---

<div class="post-metadata">

**Author:** ![jwalser](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.bluerobotics.com/jwalser/32/2234_2.png) [@jwalser](https://discuss.bluerobotics.com/u/jwalser)\
**Post date:** [October 2, 2017, 5:59pm UTC](https://discuss.bluerobotics.com/t/change-firmware-afro-30a-esc-opto/1552/2 "2017-10-02T17:59:35Z")

</div>

Hi @saeidjson, Please look at the post [here](http://discuss.bluerobotics.com/t/cannot-run-t200-thruster-in-both-directions/1490/6).

---

<div class="post-metadata">

**Author:** ![saeidjson](https://avatars.discourse-cdn.com/v4/letter/s/9f8e36/32.png) [@saeidjson](https://discuss.bluerobotics.com/u/saeidjson)\
**Post date:** [October 2, 2017, 7:53pm UTC](https://discuss.bluerobotics.com/t/change-firmware-afro-30a-esc-opto/1552/3 "2017-10-02T19:53:56Z")

</div>

Thank you jacob 😍😍😍😍

---

<div class="post-metadata">

**Author:** ![saeidjson](https://avatars.discourse-cdn.com/v4/letter/s/9f8e36/32.png) [@saeidjson](https://discuss.bluerobotics.com/u/saeidjson)\
**Post date:** [October 2, 2017, 8:30pm UTC](https://discuss.bluerobotics.com/t/change-firmware-afro-30a-esc-opto/1552/4 "2017-10-02T20:30:14Z")

</div>

Can you upload your firmware to this product?

> **[Afro 30A Muti-Rotor ESC OPTO (SimonK Firmware)](https://hobbyking.com/en_us/afro-30a-multi-rotor-esc-opto-simonk-firmware.html)**
>
> Afro 30A Muti-Rotor ESC OPTO (SimonK Firmware)

I think it is different from your product

---

<div class="post-metadata">

**Author:** ![rjehangir](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.bluerobotics.com/rjehangir/32/671_2.png) [@rjehangir](https://discuss.bluerobotics.com/u/rjehangir)\
**Post date:** [October 2, 2017, 8:44pm UTC](https://discuss.bluerobotics.com/t/change-firmware-afro-30a-esc-opto/1552/5 "2017-10-02T20:44:32Z")

</div>

Hi @saeidjson, yes, our firmware will work on that ESC.