# Build Raspberry pi Flight Controller

**URL:** <https://discuss.bluerobotics.com/t/build-raspberry-pi-flight-controller/2956>\
**Category:** Blue Robotics Software\
**Created:** [July 10, 2018, 3:46pm UTC](https://discuss.bluerobotics.com/t/build-raspberry-pi-flight-controller/2956 "2018-07-10T15:46:15Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![saeidjson](https://avatars.discourse-cdn.com/v4/letter/s/9f8e36/32.png) [@saeidjson](https://discuss.bluerobotics.com/u/saeidjson)\
**Post date:** [July 10, 2018, 3:46pm UTC](https://discuss.bluerobotics.com/t/build-raspberry-pi-flight-controller/2956/1 "2018-07-10T15:46:15Z")

</div>

hi  
I need guidance to build a controller with Raspberry pi  
I bought this [joystick](https://www.logitechg.com/en-us/product/f710-wireless-gamepad)  
Like your system, I want to do this without using Pixhawk  
The joystick will be connected to the ground station  
The commands are transmitted to Raspberry pi via the network and done something, for example read the joystick information  
help me  
Thank you

---

<div class="post-metadata">

**Author:** ![jwalser](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.bluerobotics.com/jwalser/32/2234_2.png) [@jwalser](https://discuss.bluerobotics.com/u/jwalser)\
**Post date:** [July 10, 2018, 3:58pm UTC](https://discuss.bluerobotics.com/t/build-raspberry-pi-flight-controller/2956/2 "2018-07-10T15:58:25Z")

</div>

> [@saeidjson](#):
>
> Like your system, I want to do this without using Pixhawk

Our system uses a pixhawk. You can use Navio2 or pxf mini with raspberry pi.

---

<div class="post-metadata">

**Author:** ![saeidjson](https://avatars.discourse-cdn.com/v4/letter/s/9f8e36/32.png) [@saeidjson](https://discuss.bluerobotics.com/u/saeidjson)\
**Post date:** [July 10, 2018, 4:08pm UTC](https://discuss.bluerobotics.com/t/build-raspberry-pi-flight-controller/2956/3 "2018-07-10T16:08:42Z")

</div>

I want to know how to transfer data from joystick to raspberry  
Grateful

---

<div class="post-metadata">

**Author:** ![jwalser](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.bluerobotics.com/jwalser/32/2234_2.png) [@jwalser](https://discuss.bluerobotics.com/u/jwalser)\
**Post date:** [July 10, 2018, 4:11pm UTC](https://discuss.bluerobotics.com/t/build-raspberry-pi-flight-controller/2956/4 "2018-07-10T16:11:02Z")

</div>

There are many ways to do it. Try pyjoy and sockets.