# Adding a Second/Third/Fourth Camera? **URL:** \ **Category:** General Discussion\ **Created:** [January 5, 2018, 3:55am UTC](https://discuss.bluerobotics.com/t/adding-a-second-third-fourth-camera/1956 "2018-01-05T03:55:29Z")\ **Posts on this page:** 1\ **Showing post:** 4
**Author:** ![spotxuv](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.bluerobotics.com/spotxuv/32/1112_2.png) [@spotxuv](https://discuss.bluerobotics.com/u/spotxuv)\ **Post date:** [November 19, 2020, 7:13am UTC](https://discuss.bluerobotics.com/t/adding-a-second-third-fourth-camera/1956/4 "2020-11-19T07:13:02Z")
As far as I know, it’s still not possible to do in QGC, but if you run a second screen, you can have multiple networked IP cameras showing in a browser like this > [@Custom pan/tilt camera system](https://discuss.bluerobotics.com/t/custom-pan-tilt-camera-system/8257): > > Hi all, Just thought I’d share a pan/tilt camera system we developed recently. The camera is a 1080P/25FPS IP board camera, connected to a network switch with a network enabled Arduino Uno. The Uno controls the servos from the surface using a custom webpage (local network), and the video feed is viewed on the same laptop/PC using a web browser (video below). Using a centralised underwater hub, 4 cameras are connected, and only 1 surface-to-hub cable is required (power and data). The topside we… If you were doing this on an ROV, you would have a network switch onboard to handle the multiple cameras (or you could use multiple fathom boards) --- _[View the full topic](https://discuss.bluerobotics.com/t/adding-a-second-third-fourth-camera/1956)._