# 3D prints and attachments **URL:** \ **Category:** BlueROV2\ **Tags:** 3d-printed\ **Created:** [May 31, 2017, 5:03pm UTC](https://discuss.bluerobotics.com/t/3d-prints-and-attachments/1123 "2017-05-31T17:03:17Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![Teaguey](https://avatars.discourse-cdn.com/v4/letter/t/49beb7/32.png) [@Teaguey](https://discuss.bluerobotics.com/u/Teaguey)\ **Post date:** [May 31, 2017, 5:03pm UTC](https://discuss.bluerobotics.com/t/3d-prints-and-attachments/1123/1 "2017-05-31T17:03:17Z")
I’ve been looking at 3d printing parts for the blueROV2 I have just designed and shared a glare good as when I was out in Greece sunlight coming in the top of the dome made it hard to see but hopefully this helps eliminate some of that! [https://www.thingiverse.com/thing:2355999![|375x500](upload://a1y1B96m50adwyfTVXCDGK5WRzd.JPG)![|375x500](upload://h5rZmqoFdb3IxttLmDyIX6ma9zT.JPG)](https://www.thingiverse.com/thing:2355999!%5B%7C375x500%5D(upload://a1y1B96m50adwyfTVXCDGK5WRzd.JPG)!%5B%7C375x500%5D(upload://h5rZmqoFdb3IxttLmDyIX6ma9zT.JPG)) ---
**Author:** ![jwalser](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.bluerobotics.com/jwalser/32/2234_2.png) [@jwalser](https://discuss.bluerobotics.com/u/jwalser)\ **Post date:** [May 31, 2017, 6:25pm UTC](https://discuss.bluerobotics.com/t/3d-prints-and-attachments/1123/2 "2017-05-31T18:25:20Z")
Cool! I think this gives it personality, like WALLE. ---
**Author:** ![piercet](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.bluerobotics.com/piercet/32/856_2.png) [@piercet](https://discuss.bluerobotics.com/u/piercet)\ **Post date:** [May 31, 2017, 10:32pm UTC](https://discuss.bluerobotics.com/t/3d-prints-and-attachments/1123/3 "2017-05-31T22:32:43Z")
Nice work! I was thinking of doing something similar with the lights as well. A variant of that with flow holes in the back to allow for easier water flow would also be really neat. ---
**Author:** ![Teaguey](https://avatars.discourse-cdn.com/v4/letter/t/49beb7/32.png) [@Teaguey](https://discuss.bluerobotics.com/u/Teaguey)\ **Post date:** [June 1, 2017, 1:46pm UTC](https://discuss.bluerobotics.com/t/3d-prints-and-attachments/1123/4 "2017-06-01T13:46:19Z")
Wish Granted added one with venting holes for the water at 45 degrees so light still won’t hit camera ---
**Author:** ![Teaguey](https://avatars.discourse-cdn.com/v4/letter/t/49beb7/32.png) [@Teaguey](https://discuss.bluerobotics.com/u/Teaguey)\ **Post date:** [February 9, 2018, 3:16pm UTC](https://discuss.bluerobotics.com/t/3d-prints-and-attachments/1123/5 "2018-02-09T15:16:55Z")
Here are some more designs that i have made There is the fish head glare hood variant just for fun > **[Fish Head for BlueROV2 by Jonnyteague](https://www.thingiverse.com/thing:2594203)** > > A Fish head for the dome on the BlueROV2, ever wondered what it would be like to see through the perspective of a fishes mouth, now you can! > This is just a bit of fun, i'm playing with CAD and this was my first free form design. I have also made a baitbox attachment for when you want to attract those fishies to your ROV [BlueROV2 Baitbox by Jonnyteague - Thingiverse](https://www.thingiverse.com/thing:2535537) ---
**Author:** ![Teaguey](https://avatars.discourse-cdn.com/v4/letter/t/49beb7/32.png) [@Teaguey](https://discuss.bluerobotics.com/u/Teaguey)\ **Post date:** [September 11, 2018, 10:15am UTC](https://discuss.bluerobotics.com/t/3d-prints-and-attachments/1123/6 "2018-09-11T10:15:13Z")
Heres some of the updated things ive desinged for the BlurROV2 (Some where a while ago apologies) BlueROV GPS Topside Box > **[BlueROV GPS Topside Box by Jonnyteague](https://www.thingiverse.com/thing:2787894)** > > A Topiside box for the BlueROV/ Waterlinked underwater GPS. > The case houses the tether interface board and the wire block with points to anchor these components in as well as get access to the USB port and Ethanet port and hole for the cable... An alternative GoPro Mount using the lumen light mounting holes > **[BlueROV GoPro Light Mount by Jonnyteague](https://www.thingiverse.com/thing:3094626)** > > BlueROV GoPro Light Mount, this attaches a GoPro to the existing mounts for the lumen light pods to give an alternative mounting point, which can be angled any way you need. BlueROV2 Baitbox that attaches to the Battery tube or anyother 3inch cap > **[BlueROV2 Baitbox by Jonnyteague](https://www.thingiverse.com/thing:2535537)** > > BlueROV2 Baitbox to attach to the battery tube for attract fish to the camera An updated glare hood with holes in > **[BlueROV2 Glare hood by Jonnyteague](https://www.thingiverse.com/thing:2355999)** > > Glare hood for BlueROV2 both a narrow version and a fat version to cover the to the floats. > To eliminate glare from the sun when in sunny environments. > The 'Fat' one covers the whole gap between the two floats, the normal covers just the tubes... Enjoy, Give me a shout if you print any!! I post new things on twitter more [@ jonny\_teague](https://twitter.com/jonny_teague)