Home        Store        Docs        Blog

Build   DIY ROVs


ArduSub for ROV‘s without natural longitudinal stability (2)
Blue ROv 1 / Ikelite (3)
Mobile App for DIY BlueROV2 - Experiment (1)
Is the RPI3 powerful enough - DIY Version (9)
The ROV is turned on, the 1 and 3 thrusters will start to rotate (3)
Power Sensing via Power Module to Rasberry PI (3)
A different approach to controlling the Bluerov2 (8)
Waterproofing Motor Connections (4)
Function of gain (3)
Need help with flange design for 4.5" ID acrylic tube (3)
Our OpenBlu Hybrid (8)
Need help with firmware for PXFmini and Pi3 (4)
Fully printable ROV (1)
Tether leakage test (5)
...making a Manipulator? (3)
Custom Firmware GPS holding (1)
D646WP servo connection to rov conntrols (7)
BlueROV2 heavy diy mod. Less drag (4)
The Raspberry Pi is shutting down because of the AMP spikes (3)
Heading & Depth data to surface? ( 2 3 ) (58)
Shift Control using BROV1 Config (3)
Sonar... make of Garmn or whatever?... Possible? (3)
ESCs and heat dissipation (3)
Just getting started: what is it with metric motor shaft diameters vs. english diameter propellers? (1)
DIY Raspberry Pi Shipwreck Hunting ROV (3)
Moki ROV2 (20)
Thruster Oreintation (3)
ROV Science Project - 8th Grade (2)
Buoyancy Options (2)
Control board options - pros and cons? (8)