Home        Store        Docs        Blog

BlueROV2 and ArduSub


My custom ROV is Shutting Down after the motors stop. it is also sometimes uncontrollable [BlueROV2 and ArduSub] (5)
Pymavlink and setting pid tuning parameters [BlueROV2 and ArduSub] (4)
Waiting for vehicle connection using mac, can see video and ssh, but cannot connect to vehicle [BlueROV2 and ArduSub] (5)
Pixhawk 2 Cube engines problem [ArduSub] (4)
Trouble connecting to ROV after update [QGroundControl] (6)
Active stabilizing in any angles with "Heavy" setup? [BlueROV2 and ArduSub] (4)
QGC failing to start on Windows? [QGroundControl] (9)
Sometimes lost control [BlueROV2] (3)
QGC Video Fail - Errors [QGroundControl] (5)
Adding fathometer/depth finder to Blue ROV ( 2 ) [BlueROV2] (32)
Python 3 support for pymavlink [BlueROV2 and ArduSub] (4)
Python serial error on Raspberry Pi [BlueROV2 and ArduSub] (4)
Boat configuration [ArduSub] (2)
Video stream lag on QGC [QGroundControl] (4)
QGround Control Video Lag [BlueROV2 and ArduSub] (6)
Wireless Connection instead of Tether? [BlueROV2 and ArduSub] (12)
Qground control / ardusub on raspberry pi 3 pxfmini motor not turning when armed [BlueROV2 and ArduSub] (18)
How do you reduce the lag for the CAMERA [QGroundControl] (3)
Pi wireless setup as passthru router [BlueROV2 and ArduSub] (3)
Thruster problem [BlueROV2 and ArduSub] (2)
Submarine Cable [BlueROV2] (8)
Need more servo output control via I2C ( over QGroundControl ) [BlueROV2 and ArduSub] (2)
Waiting for heartbeat from /dev/ttyAMA0 msg when connecting rsp and pixhawk ( 2 3 ) [ArduSub] (45)
Installing mavproxy help [ArduSub] (17)
Swap Out Computer and Tether [Builds and Mods] (4)
Setting up test computer ( 2 ) [BlueROV2 and ArduSub] (25)
How do you connect your Blue Robotics Lumen Lights to your Pixhawk [QGroundControl] (2)
Problems are solved,Bluerov2 heavy,Lateral left and Lateral right is not working [BlueROV2] (7)
I want to use 5 servo for aux out [ArduSub] (2)
HKPilot32 support [ArduSub] (3)