Home        Store        Docs        Blog

BlueROV2 and ArduSub   QGroundControl

No audio from mic on the Low-Light HD USB Camera when using QGC rev6? (11)
How do you connect your Blue Robotics Lumen Lights to your Pixhawk (3)
Audio and text recording with video? (14)
No motors tab on the sidebar or servo control for Newton gripper in QGC (6)
Software Updates 8 May 2018 (15)
Sending Data from Raspberry Pi to QgroundControl ( 2 ) (24)
QGroudControl is not controlling vehicle (6)
Motor-tab in QGroundControl / lights out (8)
Single thruster control (5)
Using I2C sensors with QgroundControl ( 2 ) (24)
Lowlight HD USB not working (11)
Rspberry USB video freeze (2)
QGC icon name appears as rev4 after installing rev6 (3)
Documentation on on to use QGroundControl (6)
Can I put the Raspberry Pi image on a Pi Zero (2)
JOYSTICK function (9)
Using custom frame with ArduSub (3)
Surface Position from External GPS (13)
Looking for a valid solution for solving QGroundControl crashing issue (8)
How do you set up the camera gimbal servo on QGC (Ardusub) using an MRO Pixhawk ( 2 ) (22)
How do you use 2 cameras on QGroundControl (10)
How to change the motor min and max speed (2)
Trouble connecting to ROV after update (6)
QGC failing to start on Windows? (9)
QGC Video Fail - Errors (5)
Video stream lag on QGC (4)
How do you reduce the lag for the CAMERA (3)
One-way information flow problem with Apple? (3)
Q Ground Control and Linux 32 bits (5)
Video lost on qgroundcontrol while recording (6)